How BZ Solids Control Drilling Waste Management System Achieves Zero Discharge.
How does the BZ Solids Control drilling waste management system achieve that the mud zero discharge? It is well known that in the process of oil exploration and production, well waste fluids and drill cuttings are produced. If not dealt with in time, it will seriously damage the surrounding environment and even cause personal safety. The traditional method is to dig a large mud circulation pool after drilling and completion, and carry out solidification treatment, which often causes damage to vegetation and waste of land resources. As a result, the state strongly supports the application of drilling waste treatment systems in major oil fields.
The principle of BZ Solids Control drilling waste management system.
The principle of the BZ Solids Control drilling waste management system, the cuttings are discharged along the first sand port, and the remaining liquid slurry is pumped into the BZ centrifuge for subdivision processing. At the same time, the treated mud is reinjected into the mud tank through the pipeline for recycling. BZ Solids Control drilling waste management system equipment consists of: BZ drying shale shaker, BZ vertical cuttings dryer, BZ drilling fluid centrifuge, BZ screw conveyor, BZ screw pump, etc.
Advantages of BZ Solids Control Drilling Waste Management System.
1. In the past, the discarded drilling mud was directly discharged into the mud pool. However, it is not only expensive, but also takes a long time to process it, such as dosing and stirring. With the BZ Solids Control drilling waste management system, not only the mud can be reused, but also on-site treatment can be realized, which saves time and effort.
2. The dried cuttings can be used for paving and recycling.
3. The cuttings processed by the BZ vertical cuttings dryer can be directly transported to reduce the transportation cost.
BZ Solids Control drilling waste management system can realize the secondary recycling of waste
The waste residues processed by BZ Solids Control drilling waste are mainly composed of coarse gravel and fine sand. Coarse gravel can be used as road paving or cement road filler, and fine sand can be used as wall foundation material and fire sandbags. It can also be made into non-burning bricks for building roads and paving. Truly realize the secondary recycling of drilling waste mud without falling to the ground.