BZ Solids Control drilling mud zero discharge system in drilling solids control and drilling waste treatment is critical equipment and systems.
BZ Solids Control drilling mud zero discharge system is the key to drilling waste treatment. It is the result of improvement of drilling process, replacing traditional mud tanks, reducing drilling environment pollution and enhancing environmental protection. At present, BZ Solids Control drilling mud zero discharge system, including BZ WBM drilling mud zero discharge, and BZ OBM drilling mud zero discharge. The two types of drilling mud are determined according to the mud treatment system taken by the drilling.
Drilling mud is also called drilling fluid is used to cool down the wall of the drill bit in the drilling process. The drilling mud is significant for reducing drilling accidents throughout the drilling process, and has great significance in improving drilling efficiency. Generally, the WBM system and OBM system are mainly used. And the mud system has the oil-based mud and the water-based mud.
BZ oil base mud zero discharge system is mainly targeted at directional Wells and ultra-deep Wells, which require oil base mud system to deploy mud. Oil base mud contains expensive diesel oil or mineral oil. After BZ solid Control system treatment, oil base drilling cuttings still contain oil mud. It wastes mud and increases drilling costs.
BZ water-based mud zero discharge to the ground mainly for shallow Wells, water-based mud is mainly used by soil and pharmaceutical or industrial salt and deployment, BZ solid control system using water-based mud drilling system produced in the drilling waste also contains effective mud, if not treated will also cause mud waste, recovery is required through BZ Solids Control drilling mud zero discharge system.
BZ Solids Control drilling mud zero discharge through the secondary filtration of drilling waste, saving many drilling mud, especially oil-based mud. So BZ Solids Control drilling mud zero discharge system is a key device and system in drilling solids control and drilling waste treatment.
